Adhesive Transparent LED Film

A transparent LED film display designed to mount directly on glass, including protected storefront installations where visibility and daylight matter.

IndoorTransparentHigh brightness

Pixel pitchP3.9

Brightness4000 cd/m²

Refresh rate3840 Hz

Cabinet dimensions1000 × 500 mm

Contact for PricingFinal specifications and pricing are confirmed after consultation.

Request a Quote Talk to an Expert

Consider the whole picture.

Adhesive Transparent LED Film is a thin LED display layer intended for suitable glass surfaces, letting a storefront present moving graphics while preserving some visibility and daylight. It differs from framed transparent LED cabinets: it bonds to glass and requires particular attention to glass condition, adhesion area, wiring routes and a protected installation environment. Transparency and image contrast vary with pixel spacing, the backdrop and ambient light; a dark or busy interior may change how an advertisement reads from outside. Review glazing dimensions, glass compatibility, safe access, controller placement and cleaning requirements before approving the installation. Transparent does not mean invisible, and indoor-rated film should never be assumed suitable for direct unprotected rain or sun exposure. A site survey and sample content test help confirm the effect and final pricing.

WHERE IT WORKS

Ideal applications

Storefront glassShowroomsShopping mallsInterior glass façades

BUILT INTO THE DISPLAY

Key features

Direct glass installation

Modules can be mounted directly on transparent glass from the front or rear side without requiring a conventional LED cabinet wall.

High transparency

Reference variants provide at least 55% or 68% transparency, helping retain daylight and visibility through the glazing.

Bright, smooth content

Brightness reaches at least 4,000–5,000 cd/m² depending on the model, with a refresh rate of at least 3840 Hz.

Thin and lightweight format

The reference module is only 6 mm deep excluding the power box, with a 1000 × 500 mm format for glass-based installations.

A CLOSER LOOK

Technical specifications.

Figures below refer to the specified configuration. Ask our team to confirm the variant for your application.

Display

Reference variants: TM3.9-7.8 / TM10 (Integrated Driver)
Pixel pitch (H/V): 3.9 / 7.8 or 10 / 10 mm
Pixel density: TM3.9-7.8: 32,768 / TM10: 10,000 pixels/m²

Cabinet

Module size: 1000 × 500 × 6 (power box 77) mm

Physical

Module weight: TM3.9-7.8: 6±0.5 / TM10: 5±0.5 kg

Optical

Brightness: TM3.9-7.8: ≥4000 / TM10: ≥5000 cd/m²
Transparency: TM3.9-7.8: ≥55% / TM10: ≥68%
Viewing angle: 120±10° horizontal / vertical
Refresh / frame rate: ≥3840 Hz / 60 Hz

Electrical

Average power consumption: TM3.9-7.8: 320 / TM10: 240 W/m²
Peak power consumption: 680 W/m²
Power input: AC100–240V (47–63 Hz)

Environmental

Operating temperature: -10 to +40 °C

Other

Typical LED lifetime: ≥100,000 hours

Available series variants

Variant	Pixel pitch	Dimensions	Brightness	Approximate price
TM3.9-7.8 (Integrated Driver)	3.9 mm	1000 × 500 × 6 mm (power box 77 mm)	4000 cd/m²	Contact for Pricing
TM10 (Integrated Driver)	10 mm	1000 × 500 × 6 mm (power box 77 mm)	5000 cd/m²	Contact for Pricing